Description
Simple verification tester verifies wiremap and identifies faults with LEDs.
Fullscreen
MicroMapper™
- Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.
- Easy-to-read fault display.
- Tone generator for tracing installed cables hidden in walls, floors and ceilings.
- Remote unit enables one-person testing of installed cables.
Additional information
| Model MT-8200-49A | MicroMapper and MicroMapper Remote, patch cable, 6-volt alkaline battery and user guide. |
|---|
Related products
-
EverSharp™ Blades
Fluke Networks offers three EverSharp blade designs: the EverSharp 66/110 cut blade, the EverSharp 110 blade and the EverSharp 66 blades.Through special processing of the metal, these high performance blades stay sharper longer than other competitive blades. These blades fit the D914S, D914 and D814 punchdown tools.
-
MultiFiber™ Pro
- Automatic scanning and testing of all fibers in MPO connectors with “Scan All”
- Support for both Multimode and Singlemode MPO trunks
- Eliminates the need for fan-out cords when testing fiber trunks
- Easy-to-interpret test results with minimal navigation
- User interface displays all 12 fibers
- Automated 8, 10 and 12 fiber measurements
- Troubleshoot MPO links and drill down to single fiber test results
-
Fiber QuickMap™ – Multimode Fiber Length and Distance to Fault
- Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary.
- Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours.
- Locate high loss incidents or breaks—find the most common causes of fiber failure
- See Key information on a large display; loss in db and distance in meters or feet.
- Visible in dark areas. Backlighted display turns off automatically.
- Tests 50/125μm and 62.5/125μm multimode fiber up to 1,500 meters / 4,921 feet.
- Removable SC adapter is easily cleaned.
- Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries.
- Rugged construction; vibration and drop tested to 1 meter.
- For singlemode fiber – Use Fiber OneShot PRO
-
D914™ Impact Tool
- Ensures clean, smooth terminations.
- Hook and spudger tools are built into the handle.
- Automatic spring handle—choose low impact for 24/26 gauge wire or high impact for 22-gauge wire
- Accept Phillips-head or flat screwdriver blade.
- Convenient blade storage built into the handle.
- Easy blade insertion, locks in place.
- Industry standard, internationally accepted with lifetime warranty.
