Fullscreen
FiberTEK III

FiberTEK III

  • Certification: Tier 1 certification of single-mode and multimode fibre optic cabling
  • Troubleshooting: Red laser light source to visually pinpoint faults and locate fibre ports
  • Protected test ports: Attached covers protect ports, minimise contamination and will not be misplaced
  • Encircled Flux compliance: Enables compliance to the new fibre standards IEC 14763-3 and ANSI/TIA 526-14-C
  • Field calibration: Allows 1 and 3 jumper field calibration methods to ensure accuracy and compliance to IEC and ANSI/TIA standards
  • Supports all common connector types: SC, FC, ST adapters included. LC adapters optional
  • Simplified bi-directional measurements: Eliminates process of manually merging directional tests into one record
  • Standards: Complies with all international standards including TIA and ISO/IEC

Description

FiberTEK III adapters are used with LanTEK III for fast and simple certification of high bandwidth single-mode and multimode fibre optic cabling including support for encircled flux testing.

Accessories

Part No. Recommended Accessories
R164060 FT III-Set of SC, FC and ST screw-on adapters
R164050 FT III-Encircled Flux 50/125um cable SC – SC
R164051 FT III-Encircled Flux 50/125um cable SC – LC

Sapphire Care Plans for FiberTEK III/IV

Part No Descriptions
SCP1YF Sapphire Care Plan – Fibre (Per Pair) – 1 Year
SCP2YF Sapphire Care Plan – Fibre (Per Pair) – 2 Years
SCP3YF Sapphire Care Plan – Fibre (Per Pair) – 3 Years

Included: Free repairs, free annual calibration, free loan tester during repairs and calibration, free shipping, free firmware updates, free technical support, free replaceable wear parts. Terms and conditions apply.

*when purchased within 60 days of purchasing a new LanTEK IV-S.

Additional information

Part No. R164005

FiberTEK III-MM LED Kit – Includes two multimode FiberTEK III modules, lockable semi-rigid carrying case, SC, FC, ST adapters for modules (2 ea.), SC-SC patch cords, 6x 50μm MMF compliant to ISO/ IEC 14763-3 standard, quick reference guide.
Part No. R164006

FiberTEK III-SM Laser Kit – Includes two singlemode FiberTEK III modules, lockable semi-rigid carrying case, SC, FC, ST adapters for modules (2 ea.), SC-SC patch cords, 6x 9μm SMF compliant to ISO/IEC 14763-3 standard, quick reference guide.
Part No. R164007

FiberTEK III-MM LED & SM Laser Kit – Includes two multimode FiberTEK III modules, two single-mode FiberTEK III modules, lockable semi-rigid carrying case, SC, FC, ST adapters for modules (2 ea.), SC-SC patch cords, 6 x 9μm SMF, 6 x 50μm MMF compliant to ISO/IEC 14763-3 standard, quick reference guide.

Related products

  • SignalTEK NT

    SignalTEK NT
    • Network traffic performance test on copper and fibre to IEEE802.3ab standard
    • Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard
    • Gigabit link verification for copper and fibre cabling
    • PoE/PoE+ verification that displays available voltage at device location
    • Verify network configuration (device IP/ gateway address/subnet mask)
    • Switch port identification via LLDP/CDP protocols
    • Distance to fault using TDR technology (copper only)
    • Ability to identify and trace cables with a compatible amplifier probe (R180001)
    • Optical power indication (with compatible SFP modules)
    • Stress test network before installing bandwidth hungry devices
    • Port blink to visually trace cable from work area outlet to network switch
    • Displays port ID of LLDP/ CDP enabled switches to eliminate manual cable tracing
    Read more
  • LanXPLORER Pro

    LanXPLORER Pro
    • The unique In-Line feature allows you to monitor network traffic between two devices to diagnose low level Ethernet issues that cannot be detected by either a PC or a managed switch
    • See your top 10 device downloaders and uploaders on the network to help troubleshooting
    • Supports IPv4 and IPv6
    • Touch screen for easy data entry
    • Performs a scan of your the entire network including printers, servers and PCs. Then rescan and check any changes which is useful for IT audits and troubleshooting
    • Provides a comprehensive analysis on layer 1 (physical cable), layer 2 (data), layer 3 (IP) as well as layer 4 and above
    • Field replaceable RJ45 contacts eliminate downtime from worn or damaged connectors
    • Monitoring VoIP calls and the Quality of Service (QoS) including Real Time Transport Protocol (RTP) and jitter
    • Detection of PoE and PoE+ with voltage, current and power measurements to discover any power supply issues. In-Line mode allows you to measure the consumption of your PoE devices
    Read more
  • PoE Pro

    PoE Pro
    • Multimedia Support: RJ-45, RJ-11/RJ-12 and coax ports for verification of low voltage copper cables
    • TDR Length Testing and Troubleshooting: Pinpoints cable faults eliminating unnecessary guesswork
    • Tone Generator: Ability to identify and trace cables with a compatible inductive tone probe (optional)
    • PoE Detection: Identify the IEEE standard, Class, Type, max Power (W) and Voltage (V) available
    • Large Backlit Screen: Instantaneous, easy to read test results
    • Media Service Detection: Identifies analog (PBX) and digital (ISDN) telephone services
    • Extended Power Test: Some switches / injectors may provide power exceeding its IEEE Class rating. Hold button for 3 seconds to measure maximum available power up to 90 watts
    • Ethernet Detection: Displays network rate and duplex information
    • Voltage Protection: Cable testing disabled if >2V detected
    Read more
  • LanTEK III

    LanTEK III
    • Troubleshooting features that save time and money: Locate hidden connections, splices and cable faults using Time Domain Return Loss (TDRL) and Time Domain Crosstalk (TDX)
    • Share test data: Provides mobile device connectivity using the USB Wi-Fi adapter and free TREND AnyWARE app
    • Long life battery: 18 hours continuous use in the field
    • New permanent link adapter saves money: Reduce down time and lower maintenance costs with field replaceable RJ45 contacts
    • LanTEK III Talk Set: Talk to a colleague over copper or fibre links
    • Tone generator on both test units: Ability to identify and trace cables with a compatible amplifier probe (R180001)
    • Autotest on both test units: Comprehensive test results within seconds. Allows one person testing
    • Rugged design: Rubberised housing, protected screen and protected measurement port
    • Independently verified: Accuracy verified by Intertek
    Read more