Fullscreen
LanXPLORER Pro

LanXPLORER Pro

  • The unique In-Line feature allows you to monitor network traffic between two devices to diagnose low level Ethernet issues that cannot be detected by either a PC or a managed switch
  • See your top 10 device downloaders and uploaders on the network to help troubleshooting
  • Supports IPv4 and IPv6
  • Touch screen for easy data entry
  • Performs a scan of your the entire network including printers, servers and PCs. Then rescan and check any changes which is useful for IT audits and troubleshooting
  • Provides a comprehensive analysis on layer 1 (physical cable), layer 2 (data), layer 3 (IP) as well as layer 4 and above
  • Field replaceable RJ45 contacts eliminate downtime from worn or damaged connectors
  • Monitoring VoIP calls and the Quality of Service (QoS) including Real Time Transport Protocol (RTP) and jitter
  • Detection of PoE and PoE+ with voltage, current and power measurements to discover any power supply issues. In-Line mode allows you to measure the consumption of your PoE devices

Description

LanXPLORER Pro is an In-Line tester for diagnosing problems in active and passive networks. Capabilities include troubleshooting for Ethernet connectivity and identifying faults in copper cables. Networks can be accessed through copper, fibre and Wi-Fi interfaces.

Part No. Description
MGKSX1 1 x 850nm SX MM SFP + fibre patch cord accessories kit
MGKLX2 1 x 1310nm LX SM SFP + fibre patch cord
accessories kit
MGKZX3 1 x 1550nm ZX SM SFP + fibre patch cord
accessories kit
150058 RJ-45 replacement kit – Pack of 10 replacement
inserts with extraction tool

Additional information

Part No. R150001

LanXPLORER Pro – In-line Network Troubleshooter 1 x LanXPLORER Pro test unit, 1 x remote unit #1, 1 x 2.4/5GHz Wi-Fi antenna, 1 x TREND amplifier probe R180001, 1 x power module (rechargeable), 1 x mains PSU/charger, 2 x 30cm RJ45 cable, 1 x USB Wi-Fi adapter, 1 x quick reference guide (English), 1 x carrying case

Related products

  • PoE Pro

    PoE Pro
    • Multimedia Support: RJ-45, RJ-11/RJ-12 and coax ports for verification of low voltage copper cables
    • TDR Length Testing and Troubleshooting: Pinpoints cable faults eliminating unnecessary guesswork
    • Tone Generator: Ability to identify and trace cables with a compatible inductive tone probe (optional)
    • PoE Detection: Identify the IEEE standard, Class, Type, max Power (W) and Voltage (V) available
    • Large Backlit Screen: Instantaneous, easy to read test results
    • Media Service Detection: Identifies analog (PBX) and digital (ISDN) telephone services
    • Extended Power Test: Some switches / injectors may provide power exceeding its IEEE Class rating. Hold button for 3 seconds to measure maximum available power up to 90 watts
    • Ethernet Detection: Displays network rate and duplex information
    • Voltage Protection: Cable testing disabled if >2V detected
    Read more
  • FiberTEK IV

    FiberTEK IV
    • Troubleshooting: Red laser light source to visually pinpoint faults and locate fibre ports
    • Receive LED indicator: Flashes red to warn of light from other sources, green when linked to FiberTEK IV
    • Certification: Tier-1 certification of single-mode and multimode fibre optic cabling
    • Encircled Flux compliance: Enables compliance to the 2016 fibre standards IEC 14763-3 and ANSI/TIA- 526- 14-C (optional accessory – see back page for details)
    • Field calibration: Allows 1 and 3 jumper field calibration methods to ensure accuracy and compliance to ISO/IEC and ANSI/TIA standards
    • Supports all common connector types: SC, FC, ST adapters included. LC adapters optional
    • Simplified bi-directional measurements: Eliminates process of manually merging directional tests into one record
    Read more
  • FiberTEK III

    FiberTEK III
    • Certification: Tier 1 certification of single-mode and multimode fibre optic cabling
    • Troubleshooting: Red laser light source to visually pinpoint faults and locate fibre ports
    • Protected test ports: Attached covers protect ports, minimise contamination and will not be misplaced
    • Encircled Flux compliance: Enables compliance to the new fibre standards IEC 14763-3 and ANSI/TIA 526-14-C
    • Field calibration: Allows 1 and 3 jumper field calibration methods to ensure accuracy and compliance to IEC and ANSI/TIA standards
    • Supports all common connector types: SC, FC, ST adapters included. LC adapters optional
    • Simplified bi-directional measurements: Eliminates process of manually merging directional tests into one record
    • Standards: Complies with all international standards including TIA and ISO/IEC
    Read more
  • LanTEK III

    LanTEK III
    • Troubleshooting features that save time and money: Locate hidden connections, splices and cable faults using Time Domain Return Loss (TDRL) and Time Domain Crosstalk (TDX)
    • Share test data: Provides mobile device connectivity using the USB Wi-Fi adapter and free TREND AnyWARE app
    • Long life battery: 18 hours continuous use in the field
    • New permanent link adapter saves money: Reduce down time and lower maintenance costs with field replaceable RJ45 contacts
    • LanTEK III Talk Set: Talk to a colleague over copper or fibre links
    • Tone generator on both test units: Ability to identify and trace cables with a compatible amplifier probe (R180001)
    • Autotest on both test units: Comprehensive test results within seconds. Allows one person testing
    • Rugged design: Rubberised housing, protected screen and protected measurement port
    • Independently verified: Accuracy verified by Intertek
    Read more