Fullscreen
NaviTEK NT

NaviTEK NT

  • Port & network summary info: Press the Autotest button to display summary information and allow for detailed inspection of network parameters
  • VLAN detection & operation: Automatic detection of VLAN ID’s allows the user to configure NaviTEK NT for operation on a VLAN
  • Ethernet utilisation: Real time display of broadcast network traffic shown as a percentage of port speed for the previous 60 minutes
  • CDP/LLDP/EDP port information: Show port information using Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP) and Extreme Discovery Protocol (EDP)
  • Netscan: Display list of IP and MAC addresses of every device connected to the network
  • Network Probe: View network illustration to verify test results of each network component

Description

The NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before.

Subsequently, tests can be saved as PDF reports and shared with colleagues and clients using the free TREND AnyWARE app.

———————————————————————————————————————

Part No. Description
MGKSX1 1 x 850nm SX MM SFP + fibre patch cord accessories kit
MGKLX2 1 x 1310nm LX SM SFP + fibre patch cord
accessories kit
MGKZX3 1 x 1550nm ZX SM SFP + fibre patch cord
accessories kit
150058 RJ-45 replacement kit – Pack of 10 replacement
inserts with extraction tool

 

Additional information

Part No. R153001

NaviTEK NT – Network Troubleshooter. 1 x NaviTEK NT test unit, 1 x Remote unit No. 1, 4 x AA dry cell batteries (non-rechargeable), 2 x Patch cables – 30cm, Cat. 5e STP, 1 x Quick reference guide, 1 x Carry case
Part No. R151005

NaviTEK NT Plus– Network Troubleshooter. 1 x NaviTEK NT Plus test unit with touchscreen, 1 x Remote unit No. 1, *
Part No. R151006

NaviTEK NT Pro – Network Troubleshooter. 1 x NaviTEK NT Pro test unit with touchscreen, 1 x Remote unit No. 1, *
Additional content:

1 x Rechargeable Power Module, 1 x PSU EU/ UK/US adapters, 2 x Patch cables – 30cm, Cat. 5e STP, 1 x USB Wi-Fi adapter, 1 x Quick reference guide, 1 x Carry case

Related products

  • LanTEK III

    LanTEK III
    • Troubleshooting features that save time and money: Locate hidden connections, splices and cable faults using Time Domain Return Loss (TDRL) and Time Domain Crosstalk (TDX)
    • Share test data: Provides mobile device connectivity using the USB Wi-Fi adapter and free TREND AnyWARE app
    • Long life battery: 18 hours continuous use in the field
    • New permanent link adapter saves money: Reduce down time and lower maintenance costs with field replaceable RJ45 contacts
    • LanTEK III Talk Set: Talk to a colleague over copper or fibre links
    • Tone generator on both test units: Ability to identify and trace cables with a compatible amplifier probe (R180001)
    • Autotest on both test units: Comprehensive test results within seconds. Allows one person testing
    • Rugged design: Rubberised housing, protected screen and protected measurement port
    • Independently verified: Accuracy verified by Intertek
    Read more
  • PoE Pro

    PoE Pro
    • Multimedia Support: RJ-45, RJ-11/RJ-12 and coax ports for verification of low voltage copper cables
    • TDR Length Testing and Troubleshooting: Pinpoints cable faults eliminating unnecessary guesswork
    • Tone Generator: Ability to identify and trace cables with a compatible inductive tone probe (optional)
    • PoE Detection: Identify the IEEE standard, Class, Type, max Power (W) and Voltage (V) available
    • Large Backlit Screen: Instantaneous, easy to read test results
    • Media Service Detection: Identifies analog (PBX) and digital (ISDN) telephone services
    • Extended Power Test: Some switches / injectors may provide power exceeding its IEEE Class rating. Hold button for 3 seconds to measure maximum available power up to 90 watts
    • Ethernet Detection: Displays network rate and duplex information
    • Voltage Protection: Cable testing disabled if >2V detected
    Read more
  • SignalTEK CT

    SignalTEK CT
    • Fast Autotest provides proof of network performance in seconds
    • Support for shielded and unshielded twisted pair cable including Cat 5e, Cat 6, Cat 6A and Cat 7
    • Stores up to 5000 tests to accommodate even the largest jobs
    • Identify and trace cables with a compatible amplifier probe (R180001)
    • Automatic generation of PDF test reports makes documentation effortless
    • Tests against IEEE802.3ab to assure cable performance against a recognised international standard
    • No requirement for annual calibration reducing cost of ownership
    • Field replaceable RJ45 contacts eliminate downtime from worn or damaged connectors
    Read more
  • SignalTEK NT

    SignalTEK NT
    • Network traffic performance test on copper and fibre to IEEE802.3ab standard
    • Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard
    • Gigabit link verification for copper and fibre cabling
    • PoE/PoE+ verification that displays available voltage at device location
    • Verify network configuration (device IP/ gateway address/subnet mask)
    • Switch port identification via LLDP/CDP protocols
    • Distance to fault using TDR technology (copper only)
    • Ability to identify and trace cables with a compatible amplifier probe (R180001)
    • Optical power indication (with compatible SFP modules)
    • Stress test network before installing bandwidth hungry devices
    • Port blink to visually trace cable from work area outlet to network switch
    • Displays port ID of LLDP/ CDP enabled switches to eliminate manual cable tracing
    Read more